Table could not be displayed.
Dremel 3000 and 4000 are rotary tools that are very popular with woodworkers all round the world. They come as a hand held tools with a rotary tip that accepts a wide range of attachments for different tasks. The small size of the tool, coupled with the high speed and versatility, make it a favorable tool for craftsmen.
After attaching the right bit, the tool can be used for sanding, polishing, grinding, carving, routing, engraving, sharpening, cutting and drilling. So, it can be an alternative to a lot of woodworking tools including jigsaw, circular saw, bandsaw etc.
The Dremel 4000 and 3000 are the most dominant in this segment. Unfortunately, many buyers are usually confused over which model to go for. Both the 3000 and the 4000 comes with amazing features that enable them to perform different tasks. However, it is important to note that the 4000 is an update of the 3000.
As we look at Dremel 4000 vs. 3000, it is imperative to acknowledge that the two have a lot of similarities. To begin with, you will notice that both tools come with a similar rpm range that starts from 5000 rpm. However, the 4000 caps at 35000 rpm while the 3000 at 32000 rpm. Although the difference of 3000 rpm will not make a difference in tasks such as carving, polishing or grinding, you will notice some difference when handling jobs that require a lot of power.
On the other hand, the Dremel 4000 comes with an electronic feedback control system that increases the speed of the tool as needed. This provides the user with more power especially when under heavy load. In addition, the Dremel 4000 has more power and this enables it to work effortlessly when handling heavy tasks.
Below, we have a Dremel 3000 and 4000 comparison that will help you make an informed decision on the tool that will best suit your needs. Both the 3000 and the 4000 are a good choice as they are corded and thus, are going to provide you with more power and unlimited action time.
Dremel is just like any other tool companies that offers different models at different price points. This is a strategy that ensures that they have something for every budget and thus, are able to compete with other cheaper brands on the market.
Unfortunately this variety creates a lot of confusion for buyers as they are not sure of the model to go for. Most buyers wonder whether it is worth adding more money to get the best tool available. They also wonder whether the cheaper model will work just as good.
The good news however is that, this tool comparison is here to help you make the right decision.
Features in summary
Both the Dremel 3000 and 4000 are well made tools that offer similar RPM ranges. In addition, the tools are fitted with an integrated wrench system that promises effortless bit change while at work. However, the 3000 tends to lag behind when under heavy load but the 4000 performs exceptionally well due to its slightly bigger motor.
The motor on the 4000 uses an electronic feedback system that protects it from damage while at the same time enabling it adapt to the demands of the task. As a result, the motor is able to deliver a better performance.
What Are The Main Differences The Dremel Models?
Each of the Dremel models comes with their own features, accessories and configurations. Below, we will look at their main differences so that you can easily identify the one that suits your needs and project the best.
The Dremel rotary tool has been customized to provide superior performance and while at the same time, keeping the unit vibration free, small and lightweight. This is to make it easy for the user to hold it by the hands. Unfortunately, this design constraint limits the size of the motor so that it just needs to fit in ones hands.
This is contrary to other tools where you can fit a 3 horsepower motor without worrying about size or design. The electronic feedback control system on the Dremel 4000 works to eliminate the inefficiencies of the motor while at the same time producing a more consistent power. This enables you to work on demanding projects with ease.
The 4000 is the most powerful tool that Dremel produces. This is because it is fitted with a 175 watt motor that transforms it into a tool that is more capable than any blender around. The good thing is that, you can push this tool to the limit without the risk of blowing out.
This is because rotary tools rely on speed and not torque. However, you need to note that the 3000 is slower when it comes to cutting material and therefore, you need to be very patient in the process. Just allow the tool to eat through material at its own pace.
It is no wonder that the Dremel 4000 is preferred for cutting and grinding hard materials such as tiles. However, if you are looking to perform a lot of cutting, you should consider getting one of their cutting saws.
One of the benefits of getting a Dremel 4000 is that you get a unit with a separate toggle switch. This allows you to instantly switch the tool on and off. When you switch on the tool again, it readily gets back to speed.
Also, the 4000 comes with a spin dial that allows you to set the right motor speed. On the other hand, the electronic feedback control system allows it to produce more torque at less speed.
On its part, the 3000 only has 5 speed settings to choose from and this limits the versatility of the device. Unfortunately, this tool shows signs of under performance at lower motor speeds.
Since rotary tools are designed for long term use, the manufacturers of Dremel have put in a lot of effort in making their products are durable. As a result, both models come with high quality attachments that are used for different tasks. In addition, the attachments are made of high quality materials and design.
Both the Dremel 3000 and 4000 have the same level of durability. The only shortcoming with the tools is that fine dust can find its way into the internal components and sometimes interfere with electrical conductivity. However, you can always remove these particles by using a stream of compressed air.
The other issue with Dremel rotary tools is when you drop them. The ground wire is susceptible to coming out. The good thing however is that you can have it repaired by opening the case up and soldering the wire back in place.
There are some advertisements showing the Dremel cutting through dry wall and other challenging surfaces. Unfortunately, all these cause users to become over confident about the tools. Therefore, it is important to realize that Dremel rotary tools have a limit and there are tasks that will require you to get more dedicated power tools.
The design of the 3000 is slightly different from that of 4000. This is because; the 3000 is smaller and lighter and therefore is suitable for intricate tasks such as carving as they can easily fit on one’s hand. Other than that, both tools are ergonomically designed to fit on your hand.
That way, you can be able to work for long hours without getting tired or fatigued. This is very important especially when handling complex projects that take many hours to complete.
If you are so concerned about the ergonomics of the Dremel rotary tool, it is advisable to get a shaft that provides a pencil like hold for intricate carving. The good thing is that both of these tools are corded and thus can enable you to handle heavy work without worrying about power.
Generally, corded tools tend to have more power when compared to their cordless alternatives.
Price is the other factor to consider when looking at the differences between Dremel 3000 and 4000. if you are on a budget and are looking for a rotary tool, you will find that the Dremel 3000 fits the bill as it comes at a much lower price but can do everything that the 4000 albeit at a slower speed.
The Dremel 4000 on the other hand comes at a much higher cost than the 3000. This is because the 4000 is an upgrade of the 3000 and offers much more n terms of features, bit attachments and accessories.
Dremel is in business just like other tool companies on the market. Although they have the state of the art line of superior products, they have introduced a cheaper model to compete with other affordable brands in the market. That way, they get to make higher sales. If you are just starting out on these, you will find that the 3000 is ok for the ordinary rotary tool needs.
However, if you are planing on handling heavy projects, you should consider adding a little more money to get the superior Dremel 4000 with all the bells and whistles that a rotary tool has to offer. The 4000 is not only more capable, but also is fully compatible with all Dremel bit attachments available.
The 4000 is a worthy investment if you plan on using the rotary tool for years. This is because it is very durable and thus, is going to pay off through the value that you stand getting from the tool.
A view from other users
As we were making this comparison, we thought that it was important to point out what users were saying about the two products in general. Most users agree that the attachments to the 4000 are better. This is because the 4000 is a very versatile tool that is ideal for a wide range of tasks.
Although the 3000 is compatible with a host of tools and attachments, it does not make you feel gaga. The 4000 comes with a comprehensive package that includes instructions on how to sharpen lawn mower tools.
Also, when it comes to the two Dremel tools, users have no that common belief that the older version of the tool was better than the new. This is because the makers of the Dremel seemed to have done their homework right by coming up with an upgrade tool that not only solves the problems with the old version but also, comes with its own strong points as well.
Lastly, users are in the agreement that the 4000 is better suited to handle construction tasks like cutting holes, tiles and removing grout. The 3000 has seen a growing following amongst hobbyists and crafters who engage in different artistry activities. This is because the tool boosts of great features that enable it to play its role effectively.
Rotary Tool Kit Options
The 3000 and 4000 come with different kit options that cater to the varying needs of rotary tool users. The kits differ in the number of accessories and attachments that you get. Below, we will look at the different kit options for both the 3000 and the 4000 in order for you to understand the main differences between the two rotary tools.
Dremel 4000 comes with the following kit options including:
- 4000-2/30 Rotary Tool Kit. The 2/30 tool kit has a few attachment options and is the cheapest tool kit for the 4000 series. This includes 2 attachments and over 30 accessories. The tool kit is designed for grinding, sanding and cutting purposes.
- 4000-3/34 rotary tool kit. The 3/34 tool kit comes with over 6 attachments as well as 30 accessories. These accessories are intended for cutting, grinding and sanding roles. The tool kit is more advanced than that of the 2/30.
- 4000-4/34 rotary tool kit. The 4/34 rotary tool kit comes with 4 attachments and 34 accessories. This means that you can do more with the kit when compared to the other two kits above. The kit includes circle cutters, straight edge guide, multipurpose cutting guides, sanders and grinders. The good thing with this kit is that it is useful for professional craftsmen who are involved in sanding, polishing and cutting activities.
- 4000-6/50 rotary tool kit. The 6/50 is the most sought after kit for the 4000 series as it comes with more attachments and accessories than all other kits on this list. The kit can be used by professionals looking to do cleaning, sanding, polishing, sharpening and cutting tasks.
- Compatible with a Stationary Work stand
- Electronic Feedback Control system
- Compatible with All available Dremel Attachments
- Unlimited RPM settings
- Stand alone On-Off Switch
- Change tools using EZ Twist Nose Cap
Kits available for the Dremel 3000 series include:
- 3000-1/24 rotary tool kit. The 1/24 s the cheapest rotary tool kit for the 3000 series. It is ideal for beginners who only need to use the tool occasionally. This unit comes with one attachment and 24 accessories and is suitable for a number of home improvement projects and small crafts.
- 3000-1/25 rotary tool kit. This unit comes with one attachment and 25 accessories. The extra polishing wheel is what distinguishes this unit from the 1/24. As a result, the 1/25 is ideal for polishing and sanding purposes.
- 3000-2/28 rotary tool kit. The fact that the 2/28 has more attachments and accessories than the other two kits above makes it a favorite amongst professionals and artisans. The kit comes with 2 attachments as well as 28 accessories that have a wide range of applications. It can do what the other two rotary kits above can do and much more. However it has fewer accessories than the cheapest 4000 series kit available. The good thing however is that it can handle most of your household applications but at a much cheaper price.
- 5 RPM Settings
- No Separate On/Off Switch
- EZ Twist Nose hold for changing bits.
- Compatible with other Stationary Work stands
- Not Compatible with some Dremel Attachments
Making a buying decision between the 3000 and the 4000 should be easy because the latter is an improvement of the former and thus comes with more accessories and power.
If you want a powerful tool with a lot of accessories, go from the Dremel 4000 and its best kit, the 4000-6/50. This unit also comes with an electronic feedback control system as well as a speed dial that are very useful in most projects.
On the other hand, the Dremel 3000 is ideal for beginners who want to get a rotary tool while on a budget.
To answer our initial question, the Dremel 4000 is the better tool owing to its better speed, power and versatility.